Arada Spare Parts

Grate + Grate Bars

The Stove Grate is the base on which the fire sits and burns inside the stove firebox. It allows the ashes to fall/riddle down into the ash pan were they can be removed. Multi Fuel Stoves generally have a grate; Wood Burning Stoves generally have no grate. Grates types include: [i] Fixed Grates [ACR Stoves], [ii] Riddle Circular Grate [Aga Stoves] or individual [iii] Grate Bars [Aarrow Stoves].

Glass Clips & Screws

Replacement Stove Glass Clips and Screws are designed to safely keep the glass panel in place allowing for an air tight seal to maximise the efficiency and heat output of the stove. Important: Do not over tighten clips and screws as - allow for expansion caused by the heat of the fire when the stove is lit. If the clips are too tight it will crack the glass.

Log Retainer / Front Fire Bar

The Log Retainer or Front Fire Bar is designed to increase the height of the stove fire front allowing an increased load of fuel to be added to the stove firebox. The Log Retainer prevents fuel falling on to the stove glass, as well as, out of the stove when the stove door is opened.

Stove Collars + Lifting Tools

The Stove Collar is an important part of the stove and is designed to mount to the top or the rear of the stove and then to connect the stove to the connecting stove pipe. It is used alongside the stove blanking plate.

The Stove Lifting or Operating Tool is mainly used to lift the Ash Pan out of the stove for cleaning and maintenance. For some of the stove brands such as Arada Stoves, Hamlet Solution Stove, the Stove Lifting Tool doubles up as a riddling tool

Stove Fire Rope Kit

Fire Rope is used to form an air tight seal between the stove door and the stove body to maximise the efficiency and heat output of the stove. A poor seal will allow for additional air to get into the stove fire box increasing the rate of fuel burn and reduce control over the fire burn rate. Rope thickness will vary according to the manufacturer and the size of the stove. Fire Rope is held in place by a High Temperature Rope Adhesive.

Rope Kit contains: 2.5m Fire Rope + Rope End + High Temperature Rope Adhesive.

Stove Glass Rope Gasket

The Glass Rope Gasket provides an air tight seal between the glass panel and the metal frame on the stove door. It prevents the glass panel grinding on the metal frame of the stove door when the stove is lit, as the glass expands in the frame

Stove Collars + Lifting Tools

The Stove Collar is an important part of the stove and is designed to mount to the top or the rear of the stove and then to connect the stove to the connecting stove pipe. It is used alongside the stove blanking plate.

The Stove Lifting or Operating Tool is mainly used to lift the Ash Pan out of the stove for cleaning and maintenance. For some of the stove brands such as Arada Stoves, Hamlet Solution Stove, the Stove Lifting Tool doubles up as a riddling tool

Fire Brick Liners

Fire Bricks are used to line the inside of the stove fire box. They help to insulate the internal sides, rear and top of the stove from the heat and reflect heat back towards the front of the stove, maximising heat output to the room. Most modern Fire Brick are manufactured from 25mm and 30mm Vermiculite Fire Board. We can manufacture all sizes and profiles of Vermiculite Stove Fire Bricks and Baffle Throat Plates.

Fire Brick Liners

Fire Bricks are used to line the inside of the stove fire box. They help to insulate the internal sides, rear and top of the stove from the heat and reflect heat back towards the front of the stove, maximising heat output to the room. Most modern Fire Brick are manufactured from 25mm and 30mm Vermiculite Fire Board. We can manufacture all sizes and profiles of Vermiculite Stove Fire Bricks and Baffle Throat Plates.