Blacksmith Spare Parts

A High Grade Cast Iron Replacement Baffle/Throat Plate to fit the Blacksmith Harness Stove .

Remove the fire fence and lift up the baffle plate to remove.

Baffle plates should be checked every couple of months of use to ensure that there is no build up of soot sitting above it

A 180mm diameter inner grate with a protruding riddle arm made from high grade cast iron for the popular Blacksmith Harness Stove . Remove the fire fence and Lift out the existing inner grate or circular grate and disconnect the riddle arm under the carrier frame.

A set of 4 side bricks made from high density vermiculite insulation bricks for the popular Blacksmith Harness Stove . Remove the fire fence and top baffle to replace any existing bricks that need replaced.

Fire bricks only need replacing if damage to them begins to expose the stove's bodywork to flames. In severe cases of prolonged exposure this could permanently damage the stove by cracking a cast iron side panel or warping the steel bodywork.

This is for 4 side bricks in total

Dimensions of each brick: 200mm x 95mm

A single piece rear fire brick made from high density vermiculite insulation for the popular Blacksmith Harness Stove . Remove the fire fence and top baffle to replace any existing bricks that need replaced.

Fire bricks only need replacing if damage to them begins to expose the stove's bodywork to flames. In severe cases of prolonged exposure this could permanently damage the stove by cracking a cast iron side panel or warping the steel bodywork.

Blacksmith Harness Stove  has a single piece back brick.

A set of three high grade cast iron fire fence bars to fit Blacksmith Harness Stove Spares. The Fire Fence or log retainers keep logs from falling out when the door is open and you need to add fuel.

Replacement high temperature Schott Robax glass to suit Blacksmith Harness Stove   manufactured by Hi-Flame

Dimensions (mm): 4 x 250 x 192

Delivery Available throughout UK and Ireland

Please check dimensions carefully before ordering

Image Shown does not represent size or shape of glass

A full set of high density vermiculite insulation bricks for the popular Blacksmith Anvil stove. Remove the fire fence and top baffle to replace any existing bricks that need replaced.

Fire bricks only need replacing if damage to them begins to expose the stove's bodywork to flames. In severe cases of prolonged exposure this could permanently damage the stove by cracking a cast iron side panel or warping the steel bodywork.

This set includes the 2 side bricks and the Anvil has a single piece back brick.

A set of 4 side bricks made from high density vermiculite insulation bricks for the popular Blacksmith Anvil stove.

Remove the fire fence and top baffle to replace any existing bricks that need replaced.

Fire bricks only need replacing if damage to them begins to expose the stove's bodywork to flames. In severe cases of prolonged exposure this could permanently damage the stove by cracking a cast iron side panel or warping the bodywork.

This is for 4 side bricks in total

Dimensions of each brick: 230mm x 95mm 

A High Grade Cast Iron Replacement Baffle/Throat Plate to fit the Blacksmith Anvil.

Remove the fire fence and lift up the baffle plate to remove.

Baffle plates should be checked every couple of months of use to ensure that there is no build up of soot sitting above it.

A 180mm diameter inner grate with a protruding riddle arm made from high grade cast iron for the popular Blacksmith Anvil Stove. Remove the fire fence and Lift out the existing inner grate or circular grate and disconnect the riddle arm under the carrier frame.