AX4 Multi Fuel Stove Spares

Consists of four Glass Clips, Glass and two pieces of 'L' shaped mineral paper.
Glass Dimensions: 260mm x 220mm x 3mm (10 1/4" x 8 6/8")

Fits Stoves: APEX, AX3M, AX3MP, AX4M, AX4MP, AX5M-INSET, AX5MP, ATH4MP, ATH3MP, ATH5M-INSET, AX6M-INSET, VALOR SPIRIT

4mm NeoCeram transparent Ceramic glass
Unique Silica Coating giving market leading longevity
Superior heat resistance, withstanding temperatures up to 800 °C
Polished edges to prevent cracks and splinters

Replacement Stove Glass Clips and Screws are designed to safely keep the glass panel in place allowing for an air tight seal to maximise the efficiency and heat output of the stove. Important: Do not over tighten clips and screws as - allow for expansion caused by the heat of the fire when the stove is lit. If the clips are too tight it will crack the glass.

Overall width is 318mm, overall depth is 222mm

TO FIT STOVES - ACORN5F, AX2M, AX2M-S2, AX2M-S3, ATH2M, HARDY5M-S4,

The bricks that were available in this set are now sold separately.

Please refer to the part codes below to find the correct code to order:

AFS2665 Rear liner (190mm x 165m x 25mm) 2 required
AFS2670 Side liner (260mm x 210mm x 25mm) 2 required


Fits Stoves: ECB5FPLUS, AX4M, ATH4M

The Stove Grate is the base on which the fire sits and burns inside the stove firebox. The Stove Fire Grate is designed to sit raised off the bottom of the stove internal firebox in order to allow for a draught to flow through the grate. The Stove Grate allows the ashes to fall/riddle down into the ash pan were they can be removed.