Horse Flame Artemis

A High Grade Cast Iron Replacement Baffle/Throat Plate to fit the Hi-Flame Horse Flame Artemis.

Remove the fire fence and lift up the baffle plate to remove.

Baffle plates should be checked every couple of months of use to ensure that there is no build up of soot sitting above it.

A set of 2 fire bricks LH and RH made from high density vermiculite insulation for the popular Hi-Flame Olymberyl Gabriel Stove. Remove the fire fence and top baffle to replace any existing bricks that need replaced.

Fire bricks only need replacing if damage to them begins to expose the stove's bodywork to flames. In severe cases of prolonged exposure this could permanently damage the stove by cracking a cast iron side panel or warping the steel bodywork.

A set of 2 side bricks made from high density vermiculite insulation bricks for the popular Hi-Flame Horse Flame Artemis stove. Remove the fire fence and top baffle to replace any existing bricks that need replaced.

Fire bricks only need replacing if damage to them begins to expose the stove's bodywork to flames. In severe cases of prolonged exposure this could permanently damage the stove by cracking a cast iron side panel or warping the bodywork.

This is for 2 side bricks in total

A 180mm diameter inner grate with a protruding riddle arm made from high grade cast iron for the popular Hi-Flame Horse Flame Little Artemis Stove. Remove the fire fence and Lift out the existing inner grate or circular grate and disconnect the riddle arm under the carrier frame.