Herald 6 Double Sided Single Depth

Throat plate for CE model

• Herald 6 Double sided Single depth

Vermiculite side brick for Double sided Single depth model

• Herald 6
• Consort 7

Glass panel for double door model

• Herald 5 Slimline
• Herald 6
• Herald 5 Inset
• Herald 7 Inset

This is shaped glass, if you have the rectangular glass, see part number HH06060

Glass panel for double door models

• Herald 5 Slimline
• Herald 6
• Herald 5 Inset
• Herald 7 Inset

This is rectangular glass, if you have the shaped glass, see part number HH06083

Glass panel for single door

• Herald 5 Slimline
• Herald 6
• Herald 7 Inset
• Herald 5 Inset
• Avalon 5 Slimline
• Avalon 6

Operating Tool for removing ashpan and riddling grate bars

Triangular shaped throat plate for CEvII stove

• Herald 6 Double sided Single depth
• Consort 7 Double sided Single depth

Left and Right hand side plate for Double sided Single depth model

• Herald 6
• Consort 7

This part is for CEvII multifuel and wood models.

The MK1 model does not require side plates

Fire Rope Kit

Fire Rope is used to form an air tight seal between the stove door and the stove body to maximise the efficiency and heat output of the stove. A poor seal will allow for additional air to get into the stove fire box increasing the rate of fuel burn and reduce control over the fire burn rate. Rope thickness will vary according to the manufacturer and the size of the stove. Fire Rope is held in place by a High Temperature Rope Adhesive.

Rope Kit contains: 2.5m Fire Rope + Rope End + High Temperature Rope Adhesive.

Lower Grate bar for Double sided single depth Multifuel stove

• Hawk 4 Double sided Single depth takes 5 bars
• Herald 6 Double sided Single depth takes 7 bars
• Herald 8 Double sided Single depth takes 9 bars