Write Review
Back to Top
Morso Badger 3112 - Glass Clips - GCLIPMORSO2
Availability : In Stock
£12.50 £10.42
This SiS Glass Clip & Screw is suitable for a variety of Morso stoves.
Clip Length: 20mm
Clip Width: 9m
When purchasing this item, you will receive 1 x Glass Clip & 1 x Screw.
Please order the amount you require by changing the order quantity in the box above..
Different stoves take different kinds of clips & screws/nuts so please use the images & measurements above to determine whether these will be suitable for your stove.
Please make sure when replacing your clips that you also replace the rope seal around the glass at the same time. Failure to do this could result in your glass cracking.
Also take care not to over tighten the screw as this can also crack the glass. A way to lower the risk of overtightening is to firstly tighten the screw by hand so you can check the tension and then tighten it further
| Brand | Morso Spare Parts |
|---|---|
| Part Code | GCLIPMORSO2 |
| Suitable for new natural gas | No |
| Power Vent possible | No |
| 230V necessary | No |
| Suitable For Non Constructional 12mm Hearth | No |
Frequently Asked Questions and Answers
Ask a question
Pallet Delivery
All larger items above 30kgs, including stoves, are shipped via the United Pallet Network.
In-stock items are dispatched within 48 hours and delivery lead time is generally 4 working days. Off shore and Highland locations can take up to 7 working days and can incur an additional charge.
The delivery is arranged/booked between the customer and the local area United Pallet Network Courier, who will contact by phone the day prior to delivery. If a different date is required, please arrange this direct with the courier. Also, pass on site access information if required. Couriers provide a tail lift kerb side service and are not insured to take goods into your property.
Light Goods
All light goods including Spare Parts are delivered via the Royal Mail and couriers including EVRI and DPD. Tracking information is available on request.
NOTE that we advise that you do not book Installation Contractors and Tradesmen until you have received your goods. Delays within the network can occur unexpectedly.
Warranty Cover varies between Manufacturers and Products and is effective from date of purchase Invoice. It is recommended to consult your Product Manual for further details. Warranty and Product Registration can be done directly on manufacturer website.
NOTE that consumables parts [Glass, Fire Brick, Grates, Baffles Plate] are not covered under Warranty unless stated otherwise. Improper use, lack of cleaning and maintenance evidence, unauthorised modifications, and improper installation will also affect Warranty Cover.
To get the very best performance from our new Stove, Fireplace or Flue System, it is recommended to have the Installation carried out by a qualified professional HETAS installer.
A list of stove installers throughout England, Wales, Scotland and the Channel Islands can be found:
HETAS Installers demonstrate that goods will be safely installed and complient with up to date Building Regulations and Manufacturers Guidelines anf adhering to Warranty Cover and Registration.
On-going Annual Maintenance can also be carried out by your Installer or a local Approved Chimney Sweep;
NOTE that we advise that you do not book Installation Contractors and Tradesmen until you have received your goods. Delays within the network can occur unexpectedly.
We accept all forms of payment Debit Card / Credit Card / Cheque / Bank Transfer / Paypal. All Goods are paid in full prior to dispatch and delivery. Buy Now Pay Later via Paypal and Klarna options are also available at Checkout.
Fast UK and Ireland delivery
We deliver to all parts of UK and Ireland
Price match promise